What are the common faults of the insulation cup production equipment? How to solve them?

It is the future development trend for the automatic painting production line equipment of thermos cups to replace manual work, but as long as the painting machine fails, let us see how to solve the failure of the automatic painting production line equipment for thermos cups!

1. There is no response after the automatic spray painting production line equipment of the thermos cup is started: check all the power and air sources of the spray paint machine equipment, which is the cause of the paint spray machine prone to failure, such as power supply system failure or plugging in

Poor head contact, etc. Check equipment power and power throughout the workshop:

2. There is no induction between the sensor of the thermos cup automatic painting production line equipment and the workpiece: check whether the position of the sensor of the paint spraying machine is offset. Sometimes the sensor may be caused by the negligence of the maintenance personnel. Sensitivity, if there is a problem, it must be dealt with in advance.

3. If the coating of the vacuum cup automatic painting production line equipment is poorly zeroed, check whether the amount of paint is too large and the viscosity of the paint is too high. If there is no problem, you can adjust the amount of paint and the viscosity of the paint to improve fundamentally, and you can try changing the spray gun. You can no longer ask professional maintenance personnel to solve it.

4. Uneven spraying of the vacuum cup automatic painting production line equipment: check whether the remaining paint is insufficient, and whether there is dirt on the nozzle of the paint sprayer. The nozzle of the spray gun can be cleaned with paint.

The above are the common faults and solutions for the spray painting equipment of the thermos cup. I hope it can help everyone!